Installation and Use
Pelvic belts may be installed in various manners depending on hardware, seating system or
wheelchair type. Many choices of aftermarket attachment hardware are available. Be sure to read
and understand all instructions supplied with any aftermarket hardware.
Tri-End around Seat Rail
Fastened Tri-End
Tri-End is attached using a fastener and a hole in the seat rail.
Thread the belt around the wheelchair tube in the correct location as shown above.
Thread the belt around the wheelchair tube in the correct location as shown above.
Tri-end is attached using a fastener and a hole in the seat rail, then
thread the belt through the Tri-end and D-Clip as shown above.
NOTICE:
Ensure that the webbing is routed properly through the belt anchor and does
not slip when pulled. Improper routing could lead to the strap becoming loose and
slipping from the belt anchor.
Sliding Double-D Clip around Seat Rail
Sliding Double-D Clip with Tri-End
