Stealth Products IDCH User Manual Download Page 5

iv 

Warranty 

4.0 

Our products are designed, manufactured, and produced to the highest of 
standards. If any defect in material or workmanship is found, Stealth Products 
will repair or replace the product at our discretion. Any implied warranty, 
including the implied warranties of merchantability and fitness for a particular 
purpose, shall not extend beyond the duration of this warranty. Stealth 
Products, LLC does not warrant damage due to, but not limited to: 

Misuse, abuse, or misapplication of products.

Modification of product without written approval from Stealth Products, LLC.

Any alteration or lack of serial number, where applicable, will automatically void
this warranty.

Stealth Products, LLC is liable for replacement parts only.

Stealth Products, LLC is not liable for any incurred labor costs.

No person is authorized to alter, extend, or waive the warranties of Stealth 
Products, LLC. 

Stealth Products warrants against failure due to defective materials  
or workmanship: 

Covers: 

2 years

 

Hardware: 5 years 

Electronics: 3 years 

In Case of Product Failure 

In the event of product failure covered by our warranty, please follow the 
procedures outlined below: 

1.

Call Stealth at +1 (512) 715-9995 or toll free +1-800-965-9229.

2.

Request the Returns Department or obtain an RA from the Returns Department and follow
department or documentation instructions.

Summary of Contents for IDCH





























Reviews: