6
Functioning
6.0
Addition/Removal Of Link
6.1
If additional height is required:
Step 1:
Locate the link screw (E1) on the top link. Remove the M5x.8x20mm FHS from the link,
detaching the joystick mount and link nut.
Step 2:
Line up holes on link and add the IDCH-Link (E) to open end.
Step 3:
Insert link screw (E1) and tighten with a 3mm T-Handle.
Step 4:
Remove screw at the top of the new link.
Step 5:
Add joystick mount and link nut, lining up all the holes. Insert screw and tighten.
CAUTION
DO NOT OVER TIGHTEN SCREWS.
This could cause wearing of screws or joystick threads, causing
the client to lose efficient control.
2
F
5
E1
E
