Installation Instructions
9.0
8
Installing
the
Laterals
9.6
Step One:
Place the Q-back lateral track nut into the groove of the 125° lateral bracket.
Step Two:
Slide the 125° lateral bracket between the aluminum and covered foam back.
- The depth that the bracket is placed can be adjusted to change the horizontal placement
of the lateral to the appropriate position for the user.
- The vertical alignment of the bracket can be adjusted within the wing’s vertical track.
Step Three:
After having the bracket in the correct position, use the two M6 x 1 x 12mm button head
cap screws, each with a 1/4” washer, to secure the bracket in place to 10nM of torque.
Step Four:
Repeat Steps 1 through 3 to mount each additional lateral. The Swing Away lateral would
be mounted in the same manner on the lateral bracket but would also have an additional two
M5 x 0.8 x 10mm button head cap screws tightened to 6nM of torque.
1
2
3
4
