www.wildviewcam.com
Toll Free 877-269-8490
17
(Example: Mounting)
(Example: Trail Setup)
www.wildviewcam.com
Toll Free 877-269-8490
18
Testing the camera coverage area:
One of Wildview Cam Scouting Camera’s features is the ability to test the
coverage area.
1.
After mounting the camera, open front housing and slide the
CAM
toggle
switch to
TEST
position. The front LCD will display the word
“tESt”.
2.
Close the front housing.
3.
Walk around to the front of the camera to see if you have mounted the
camera in the proper position. The green TEST light indicator on the front
will blink when you have intruded the coverage area.
4.
Adjust the camera position as needed and repeat testing until the desired
coverage area is achieved.
5.
When you have completed testing the coverage area, open the front
housing and slide the
CAM
toggle switch from
TEST
position to the
ON
position.
Caution:
Do not move the switch from TEST directly to ON. Doing so
will cause the camera not to operate. Slide the switch to OFF. Wait
for the front LCD screen to turn off, then continue to slide the switch
to ON.
6.
The front LCD counter will show “00000” and the green indicator light
will start blinking. The camera will enter count down mode for 1 minute,
giving you one minute to leave the coverage area. Then camera will be
armed and enter the PIR detection mode.
NOTE: Make sure you slide the power switch from TEST mode to ON
mode before you leave the field, otherwise the Camera will not take any
pictures.
www.wildviewcam.com
Toll Free 877-269-8490
19
VIEWING AND DELETING FILES
Your Wildview Cam Scouting Camera is a plug and play USB storage device for
users of Windows 2000 / ME / XP / Vista / Windows 7 operating systems.
This camera is compatible with MAC 10.6 and above.
Viewing files from your computer download:
1.
FIRST, slide the
CAM
toggle switch to the
OFF
position.
2.
Plug the larger end of the USB cable into an available USB port on your
computer and plug the smaller end of USB cable into the camera.
3.
The camera will automatically power itself on. Front LCD screen will show
“USb.”
4.
At the same time, your computer will recognize the camera as a
Removable Storage device, and you can find it under MY COMPUTER.
5.
At this point you have several options:
www.wildviewcam.com
Toll Free 877-269-8490
20
To view your images or play your videos:
Click on the Removable
Storage device and then drill down to the file you want to see and
double click on the file name.
To save your images and videos:
Highlight the file or files you want
to save and drag them to your hard drive.
To delete your images and videos:
Highlight the files or files you
want to delete and press the
[DELETE]
button.
To erase all files and reformat you SD memory card
: Right click on
the Removable Storage device under My Computer and select
FORMAT
then click
START
. You will receive a Warning message press
[OK]
.
Then
CLOSE
to exit.
NOTE: Make sure before you FORMAT you are certain it is the Removable
Storage device for the camera.
6.
Once you’re done, simply unplug the cable from both your computer and
the camera. The camera will turn OFF automatically.
