Stealth Cam STC-SNX1, Instruction Manual

Page: 30 / 45

WWW.STEALTHCAM.COM
Toll Free 877-269-8490
30
•
30 seconds after you’ve made your adjustments, the camera’s
green LED light will begin blinking and enter count down mode.
This is your indication to leave the coverage area within one
minute.
•
After one minute, the camera will enter either image burst mode
or adjustable video mode based on your program setting. The
camera will then time out between 0-­‐59 seconds or 0-­‐59 minutes,
depending on your program setting.
NOTE: The time between motion detection and the camera taking
the pictures may vary due to lighting conditions, program settings,
and battery power level. The IR Emitter will only activate in low light
conditions.