STC-I430IR
www.stealthcam.net
Toll Free 877-269-8490
24
•
Open the front housing and move the switch to the ON position.
At this point, you have 30 seconds to make any program
adjustments.
•
After 30 seconds the camera’s green LED light will begin
blinking and enter count down mode. This is your indication to
leave the coverage area within one minute.
•
After one minute, the camera will enter either image burst
mode or adjustable video mode based on your program setting.
The camera will then time out between 1 ~ 59 minutes,
depending on your setting.
The time between motion detection and the camera taking the
pictures may vary due to lighting conditions, program settings,
and battery power level.
The IR Emitter will only activate in low light conditions.
