Stealth Cam STC-G42C, Instruction Manual

Page: 17 / 54

www.stealthcam.com Page
877-­‐269-­‐8490
17
CAMERA PROGRAMMING -­‐ CUSTOM (CONT)
o
SECURITY KEY CONFIGURATION – 0000 (default): To change the key to an owner
operated one press the ENTER button. With this option blinking, use the UP or DOWN
arrow buttons change the first digit to the preferred number or letter. Then using the
LEFT button, move to the second digit and change it to the preferred number or letter
as well. Continue this until all 4 digits are correctly set. Finally press the ENTER button
to secure the new code.
NOTE: The camera owner is responsible for remembering the code. Should the code be forgotten
the owner must call in to Customer Service (877-­‐269-­‐8490) for directions on getting the unit
restored to factory default. In order for the owner to be authorized for the reset, this camera
must be registered with Stealth Cam.
Ø
FORMAT CARD – NO (default): This setting is used to format the SD memory card installed.
With this option blinking, pressing the UP or DOWN arrow buttons will cause the camera to
cycle between the two options of NO or YES. When the YES option is chosen and the ENTER
button is press the camera will format the card, deleting any previous information that was
on the card. Pressing the DOWN arrow key will move the display back to the starting option
of SETUP DATE.
Ø
LANGUAGE – ENGLISH (default): This new feature allows you to select which language you
prefer to use in the menu. By pressing the ENTER button you will be able to scroll through
the following choices: English / German / French / Spanish. Once selected press the ENTER
button again to save your setting.