Stealth Cam FX SERIES, Instruction Manual

Page: 9 / 36

www.stealthcam.com Page
877-­‐269-­‐8490
9
CAMERA PROGRAMMING – CUSTOM (CONT)
CUSTOM – This is the
other
setting and is defined by the “user”. When the camera is changed to
the this mode, the display screen will give a digital read out
based on the current capture setting:
9 Photo Delay
–
(Photo Capture Mode) Counts down from 9sec to 0sec
9 Video Delay – (Video Capture Mode) Counts down from 9sec to 0sec
The system default programming is set to take photos at
MED
resolution, 5
-
second timeout delay
and 1 Photo Burst. The
9-
second timer will count down towards 0 showing how much time is left
to enter the Custom configuration menu.
To make changes to the programming, press the
ENTER BUTTON
to enter the configuration menu
before the countdown reaches zero.
While in the configuration menu
pressing the DOWN arrow
button you will move to the next setting option, which is DATE. By pressing the UP or DOWN arrow
you will be allowed to scroll through all the different menu choices. Once you find the option you
want to change press the
ENTER button. Pressing the ENTER button on a listed configuration
option will cause the option to blink and allow it to be changed. By pressing ENTER again once
an option has been changed will set the new configuration, save it to the camera’s memory,
and return to options section of the MENU configuration. Once all the settings have been
changed to the operator’s desired settings scroll through the menu till you see the word QUIT and
then press ENTER .
The following
pages
are all the options and descriptions of how to change each configuration: