Page 4
Recommended tools:
The following tools may be necessary to complete the
installation of the SteadiStand:
□
3mm Allen (hex) key
Used to make adjustments to the tensioning set screw located
inside the stock Segway
®
parking stand swivel mount. This tool
was included when you purchased Segway
®
PT.
□
4mm Allen (hex) key
Used to unscrew the original Allen (hex) set screw from the stock
Segway
®
parking stand swivel mount. This tool is only necessary
if the spring portion cannot be removed by hand or with the use
of pliers.
□
Pliers (Channel Lock type if available)
Used to remove the old spring portion should it not easily loosen
by hand.
