required tools
unpack
M4 x 12mm screw, lock washer and washer
Make certain the following installation hardware and components are included. If any of the parts are missing or
damaged please contact STC Customer Care at (800) 293-2923.
Parts are not shown actual size.
M4 x 30mm screw, lock washer and washer
M5 x 12mm screw, lock washer and washer
M5 x 30mm screw, lock washer and washer
M4/M5 large spacer
4 x
stud finder
phillips screw driver
2
1
tape measure
safety glasses
pencil
power
drill
5/32” (4mm) wood drill bit
or
1/4“ (6mm) + 3/8” (10mm) masonry drill bits
lag bolt and washer
nylon anchor
2 of 12
www.stcny.com
M4 x 8mm screw to connect
wings to VESA mount
8 x
M4 x 8mm safety screw
allen key
1 x
right extension wing
left extension wing
wall plate
dual arm tilt VESA mount
1 x
!
The dual arm tilt VESA mount is shipped with the plate attached with the safety screw.
Remove the safety screw and wall plate. They will be attached to the mount in step 9.
