ENGLISH
10
10
Changing accessories
Always make sure the tool is turned off and unplugged
before installing the abrasive wheel.
On the
LU 260 CE
model, press the axis lock button 6 and
screw in the desired accessory while the axis is locked.
On the
PL 2500 E
model, you must use the included
wrench to hold the tool shaft while screwing in the desired
accessory.
Maintenance instructions
Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.
Repair service
Our after-sales service responds to your questions
concerning maintenance and repair of your product as
well as spare parts. Exploded views and information on
spare parts can also be found under:
Our customer consultants answer your questions
concerning best buy, application and adjustment of
products and accessories.
Disposal and recycling
The machine, accessories and packaging should be
sorted for environmental-friendly recycling.
Only for EC countries:
Do not dispose of power tools into household
waste!
According the European Guideline 2012/19/UE
for Waste Electrical and Electronic Equipment
and its implementation into national right, power
tools that are no longer usable must be collected separately
and disposed of in an environmentally correct manner.
Subject to change without notice.
Regulations
= Power input
= No load speed
= Plate dimension
E
= Bladeshaft
= Weigth
= Sound pressure level
= Sound power level
= Vibration
The values given are valid for nominal voltages [U]
230/240 V ~ 50/60 Hz - 110/120 V ~ 60Hz. For lower
voltage and models for specific countries, these values
can vary. Please observe the article number on the type
plate of your machine. The trade names of the individual
machines may vary.
Summary of Contents for LU 260 CE
Page 4: ...1 1 2 2 7 3 4 4 3 5 6 5...
Page 29: ...29 29 1 2 RCD RCD 3 4...
Page 34: ...NOTAS 34...
Page 35: ...NOTAS 35...
