stayer LOM 230, Operating Instructions Manual

Page: 5 / 8

es
gb
- 5 -
This manual corresponds to the manufacturing date,
the information displayed in the technical data sheet
and the manual itself may be updated in our webpage:
www.grupostayer.com
¡ WARNING! Before using this tool, carefully
read this manual and the general safety ru-
les included in the packaging.
1_SPECIFIC SAFETY INSTRUCTIONS
This tool is not suitable for children use.
Before any reparing, assisting or maintenance actions ,
unplug it from its power source.
If the tool falls down check it for any kind of damage.
This tool
does not require a third cable as a ground
connection .
Do not expose to humidity or rain.
Keep away from children.
CONNECTION TO THE ELECTRICITY GRID
Before plugging the tool, make sure the grid tension is
the same as the one displayed in the labels.
USE CONDITIONS
This tool is specially aimed to carpenters and general
wood working, sanding any kind of wood surface and
removing paint.
WORKFLOW OPTIMIZATION
An inappropiate sanding placement, or the metallic
claws may damage the tool.
Choose the sanding grain according to the task. To
achieve a good finish always use fixed sanding papers.
Do not excessively press the tool against the working
surface as it may get damaged.
Do not use this sander with water.
Never sand wood and metal with the same sanding
paper.
Included accesories
1 sanding sheet
1vacuum cleaner adapter
1 reduction
1 dust bag
2_ASSEMBLY
Sanding sheets are secured with two claws.
Completely lift (up to 90º) the two levers in the tool
base and place the sanding paper on the center with
both sides folded so the claws can firmly hold the pa -
per. Take down the levers to secure the paper.
Make sure the sanding sheet holes fit the vacuum
wholes placed in the vibratory rubber plate.
To improve the sheet's setting it is advised to fold both
paper edges to increase its thickness.
Always make sure the space between the rubber plate
and the sanding sheet is clean. If it were not use a
nylon brush to clean it.
SWITCH ON/OFF
To switch on the tool press the button in the main
handle. For long tasks you can use the set button next
to the main button. To activate it press it while the main
button is already pressed.
To switch off the tool simply release the switch button
or briefly press it if you activated the set button.
Dust collecting tube
The dust collecting tube allows clean sanding tasks
with dust easily cleared from the workplace.
To place the tube, fit in the mouthpiece into the tool's
vacuum adapter. The adaper's diameter is 40 mm.
3_CLEANING AND MAINTENANCE
INSTRUCTIONS
MAINTENANCE
Before any reparing, assisting or maintenance actions
,
unplug it from its power source. It is advised to periodi-
cally clean the inner engine with compressed air throu-
gh the vacuum sockets to grant the best ventilation.
This task is of upmost importance after working with
marble, stone, bricks or tiles, as this materials require
more cleaning maintenances.
Consistently clean the sanding sheet by slightly hitting
its surface.
Spare parts and assistance
All of our tools are warranty protected. There are
Authorized Assistance Centers scattered all around
the country which offer an efficient service using ex -
clusively original STAYER spare parts.
WARRANTY
Warranty card
Included in the tool documentation you will find a
warranty card where you must place your purchase
invoice.
If you can not find it immediatly request it to your seller.
All the STAYER tools are under warranty valid from
the sale date.
Other documents to prove your purchase:
Purchase invoice, elivery note, ox bill.
STAYER is required to repair or substitute for free the
product or parts of it which may be defective after its
technician examination.
The warranty is limited to production and manufacture