HOW TO USE
Left/Right channel marks
on the cable plug
Photo2
The enlarged view of the slider
Left/Right channel marks of the
earspekers
The figure to the right is L-CH.
Hold the slider with your fingers and slide
up and down to adjust the position.
Photo3
Serial-number sticker is applied
here.
(
Left channel
)
-4-
CAUTION
Outlet of the earspeakers
●
Take the earspeakers and the attached cable
(
1.5m or 2.5m
)
out of the case. Confirm Right and Left
marks on the cable plugs and firmly insert the cable into the outlet of the earspeakers.
When pulling out the cable to change cables, please be sure to hold the plug and pull it straight out.
For details, please refer to “NAME OF EACH PART” on page 3.
●
SR-X9000 is electrostatic type earspeakers that operate on STAX PRO series bias
(
DC580V
)
.
Connect SR-X9000 to the 5-pin outlet of STAX driver unit.
●
Confirm the 5-pin positions and firmly insert the plug into the outlet of STAX driver unit.
And when pulling out the plug, please be sure to hold the plug and pull it straight out.
Pulling diagonally the cable plug out may damage the plug or the outlet.
If the outlet is too tight to insert the cable, insert the cable plug holding the driver unit.
●
As Left/Right indications, the gold solid line (left) and the gold dotted line
(
right
)
are found on the
cable. L/R marks are on the cable plug.
(
Photo 2
)
●
How to adjust the head pad height;
The height of the head pad can be adjusted by moving the sliders on the left and right side of the
head pad.
(
Photo 3
)
●
Be sure to hold the earspekers with both hands when putting on and off.
Figure1
“L” or “R” mark
Summary of Contents for SR-X9000
Page 1: ...Owner s Manual...