7
Status
Pro
–
T430 User Guide
1.6 Calibration and Repair
To guarantee measurement accuracy and reliable operation of your
Status Pro Measurement System, it is of utmost importance that the
recommended service intervals be adhered to. The system should be
checked for serviceability, and re-calibrated by the Status Pro R&K-
Service every 12 months.
Within the scope of the service checks, the complete system will also be
examined for possible wear or damage, as well as receiving any software updates. The
date of the next service check for your equipment is stamped on the Status Pro calibration
sticker.
To ensure trouble-free processing of the service and calibration checks, simply fill in the
form you will find using the following link:
www.statuspro.com/doc/Formulare/FORM_RepairCalibration_1032_E.pdf
1.7 Liability Exclusion
The Status Pro GmbH does not accept responsibility for damage incurred through
incorrect use or handling of the equipment. To ensure correct usage, a founded know -
ledge of the equipment is essential. It is of the utmost importance that you read and under-
stand the user guide!
No responsibility will be accepted for damage incurred through ignorance or disregarding
of the operating instructions.
SAFETY INSTRUCTIONS
