22
Status
Pro
–
µLevel Instruction manual
LEVEL ANDROID SOFTWARE
In this case (shown left) the 1st µLevel has
been zeroed. The 2nd µlevel displays its
original value (-1573).
On the right we see that now both µLevel
have been Zeroed.
Units
You can choose between µm/m and mm/m. Note: µm/m = µRad and mm/m = mRad. Just
touch the symbol:
7.3
Differential (Delta)- and Rightangles- resultant
When using two µLevel you will have one of the following setups. Either you want a differ-
ential measurement (µL1 - µL2) or you are using both at rightangles and you want the
resultant inclination. To toggle just touch the symbol on the third line:
Display transfer of the µLevel
The µLevel will only transmit data to your Android when the µLevel is in the measurement
mode I or II.
II) In measurement mode II the range is 4 Decimal points and the accuracy is µm/m. In
measurement mode I the range is 3 Decimal points and the accuracy is mm/m.
I) In measurement mode I measured values will be displayed with an accuracy of 10µ/m
