StattQualm – January 2014
Factual: Wicks are dunked in Liquid and multiple short glows through the development phase.
4. Step:
The most important and decisive moment:
Vertical channels in the base should remain
free. On the one hand, it will achieve an
optimum liquid flow, on the other hand you
might risk depressing the liquid flow.
Subsequent the bell is put over the base where
the fiberglass cords are. These need to be cut to
their correct length, since when pinched you
will cut off the flow of liquid.
Both wicks are shortened to be flush with the
outside of the base!!
5. Step:
The filling of the SQuape’s is simple and quick.
As you dismantel the tank from the base, one
needs to turn the item upside down due to the
fact that the filling hole is on the bottem of the
Base. The SQuape holds a maximum of 5.2 ml
and thus is at maximum filling volume.
Using a hollow needle bottle designed to fill is the
simplest, but a normal bottle may be used, this
makes it childsplay!
Attention! In addition do not fill the bell!
