PS/S2114/Rev.2/215
STATICO
Global Supplier of Static Control & Cleanroom Products
541 Taylor Way, #1, San Carlos, CA 94070 USA | www.statico.com
Phone: (650) 592-4733 | Fax: (650) 508-0761 | Email: [email protected]
Product Information & User Manual for S2114
Wrist Strap Checker
Description
The S2114 is a precise device to perform on demand testing of all standard & conventional
single conductor Wrist Grounding Straps for proper skin resistance, continuity, and the built-in
safety resistor. This product features 3 universal Receptacles/Contact Points for a wrist strap
assembly:
Banana Plug, Alligator Clip, & 3/8” Male (10mm) Stud. NIST Certified.
Meets ANSI/ESD S20.20-2014.
Specifications
Lo- Fail (Constant Red LED indicator)
<800K
Ω
Pass (Green LED & Continues Audible indicator)
800K
Ω to 10MΩ
Hi Fail (Constant Red LED Indicator)
> 10M
Ω
Accuracy
+/- 5%
Test Voltage
9VDC
Operating Voltage
≥ 6.5 Volts < 9 Volts
Low Battery set at
6.5 Volts (Red LED indicator)
Operating Temperature
10ºC to 40ºC
Storage Temperature
-15ºC to + 60ºC
Relative Humidity
0% to 90% (None-Condensing)
Net Weight
2.95oz (83 g)
Weight with 9V Battery
42.5 oz (120 g)
Dimensions
2-
3/8”x3-3/4”x1” (60mm x 95mm x 252mm)
Components
The package of S2114 includes:
•
1 Each The Tester
•
1 Each A 9VDC Alkaline battery*
•
1 Each Product Information
•
1 Each User Manual
Inspect the package upon receipt to make sure that all above are in the unit pack.
Functions
•
S2114 Is designed to check the followings in a standard single coonductor wrist grounding strap:
o
Existence of the molded 1 meg current limiting safety resistor at the snap end of cord.
o
Skin Contact
o
Continuity