About Static Clean
At Static Clean International, we’ve been providing Static and Contamination Control Solutions to clients nationwide since 1973.
We capitalize upon this wealth of experience to service our customers in a variety of ways. Whatever their needs, our
comprehensive approach to controlling static / contamination translates into a much lower total cost of ownership solution for them.
Industrial/Medical/Electronics Applications
For our customers, we provide a line of Static and Contamination Control industrial products including static bars, power supplies,
air guns, airknives, benchtop and overhead ionizers and WebVacs that we manufacture ourselves. These exceptional products
address a host of common process problems including mis-feeds, poor lamination, jogging and stacking problems, shock to
operators, jammed injection molds, particle contamination, fires and explosions.
Static Control
Sentinel BTI
Benchtop Ionizing Blower
4
Static Clean International • 15 Adams St., Burlington, MA 01803
Tel: 781-229-7799 Fax: 781-229-4555 • www.staticclean.com
Changing Voltage
The input power voltage should be set to your specification as
ordered and prior to shipping. It is marked on the box label and
the spec label affixed to the bottom of the unit. The voltage
can be reset to a different AC voltage by removing the back of
the case. NOTE: The AC power cord MUST always be
disconnected before the unit is disassembled. Reconfigure the
voltage jumpers as shown in the diagram(s) below to match
your AC line voltage supply.
Input voltage is selected with the two internal jumpers as
shown below:
115 Volt Jumper Settings
230 Volt Jumper Settings
Limited Warranty
Static Clean expressly warrants that for a period of one (1)
year from the date of purchase, the ionizer will be free of
defects in material (parts) and workmanship (labor). Within the
warranty period, a unit will be tested, repaired, or replaced at
discretion of Static Clean, free of charge. Any unit under
warranty should be shipped prepaid to the Static Clean factory.
Call Customer Service at (781) 229-7799 for a Return Material
Authorization (RMA) number and shipping instructions. Include
a copy of your original packing slip, invoice, or other proof of
purchase date.
If the unit is out of warranty, Static Clean International, Inc. will
quote repair charges necessary to bring your unit up to factory
standards.
Warranty Exclusions
The foregoing express warranty is made in lieu of all other
product warranties, expressed and implied, including
merchantability and fitness for a particular purpose that is
specifically disclaimed. The express warranty will not apply to
defects or damage due to accidents, neglect, misuse,
alterations, operator error, or failure to properly maintain, clean
or repair products.
Limit of Liability
The user shall determine the suitability of the product for their
intended use, and the user assumes all risk and liability
whatsoever in connection therewith.
voltage selection header
jumpers
Power Jack
voltage selection header
jumper
Power Jack
