STATESMAN MAXI 60 GSF User& Installer'S Manual Download Page 11

 

 

 

LEVE LLING  

Place a spirit level on an oven pan or shelf and adjust the feet accordingly. Make sure that 
the appliance is stable and does not rock. 

 

GAS CONNE CTION  

 

Always grip the appl i ance inlet fitting f ir mly  when 
fitting the hose to prevent any dam age o ccurring. 

 

Never che ck for ga s l eaks with a naked fl ame. 

The cooker is fitted with a ½’’ BSP internal thread situated at the rear right corner.  A 
flexible hose of correct rating in size and temperature should be used. For Natural Gas it 
will be a black hose with a yellow band or label and should comply with BS 669. 

LPG hoses should be suitable for LP gases up to 50 mbar pressure and 70

0

C temperature 

rise. It  will be a black hose with a red band or label. 

Hoses should not exceed 1.5m in length. 

Pressure setting – G20 Natural Gas @ 20 mbar 

                                   G30 Butane @ 28.3 mbar 

                                   G31 Propane @ 37 mbar 

NOTE; 

The gas hose and electrical cables of your cooker must not come 

into direct contact with any hot or sharp surfaces  or objects. Do not 
move the appliance after the gas connection has been made. Make sure 
that the hose is not kinked, damaged or trapped. 

 
ELECT RICAL  CONNEC TION 

 

M a k e   s u r e   t h a t   t h e   e l e c t r i c i t y   s u p p l y   i s   c o m p a t i b l e   w i t h   t h e  
t y p e   s t a t e d   o n   t h e   d a t a   p l a t e   o f   t h e   a p p l i a n c e .  

 

T h i s   a p p l i a n c e   m u s t   b e   e a r t h e d .  

 

T h e   c a b l e   s h o u l d   n o t   t o u c h   a n y   h o t   s u r f a c e   o r   s h a r p   o b j e c t s .  
T h i s   i s   t o   a v o i d   d a m a g e   t o   t h e   c a b l e   w h i c h   c o u l d   c a u s e   a   s h o r t  
c i r c u i t .  

 

T h e   e l e c t r i c a l   s w i t c h   s h o u l d   b e   w i t h i n   1 . 5 m   o f   t h e   a p p l i a n c e  
a n d   a n   e x t e n s i o n   l e a d   s h o u l d   n o t   b e   u s e d .  

 

D o   n o t   i n s t a l l   t h e   a p p l i a n c e   w i t h   a   d a m a g e d   c a b l e .  

 

I n c o r r e c t   i n s t a l l a t i o n   w i l l   i n v a l i d a t e   t h e   g u a r a n t e e .    

11 

Summary of Contents for MAXI 60 GSF
















Reviews: