8
Connecting to the Gas Supply
WARNING: This appliance must be installed by a registered CORGI gas safe engineer. The
appliance must be installed and connected in accordance with the manufacturer’s instructions and
to the relevant British Standards.
Note:
This appliance is supplied to run on LPG and natural gas. Conversion for use on LPG and natural gases must
only be undertaken by a registered CORGI gas safe engineer.
seal
G1/2"Female coupler
The gas rail
seal
The gas rail
NG > LPG
LPG > NG
Gas supply replacement and installation guidelines:
• It is law that all gas appliances are installed by competent persons in accordance with the
current edition of the Gas Safety Installation and Use Regulations.
• It is in your interest and that of safety to ensure compliance with the law.
• In the UK, GASSAFE registered installers work to safe standards of practice. The appliance
must also be installed in accordance with the current edition of BS 6172. Failure to install the
appliance correctly could invalidate the warranty, liability claims and lead to prosecution.
I
3+(28-30/37)
G30 Butane at28-30mbar and G31 Propane at 37mbar
I
3B/P(30)
G30 Butane and G31 Propane at 30mbar
BE, CH, CY, CZ, ES, FR, GB, GR, IE, IT, LT, LU, LV, PT, SK, SI
I
2H
/I
2E
/I
2E+
BE, CY, DK, EE, GB, HU, IT, LT, NL, NO, SE, SI, SK, RO, HR,
TR, BG, IS, LU, MT, FI
G20 M ethane at 20mbar
II
2H3+
CH, CZ,ES,GB,GR,IE, IT,PT,SI
G20 at 20mbar, G 30 B utane a t 28-30mbar a nd G 31
Propane at 37mbar
II
2H3B/P(30)
AT,CH,CZ,DK,ES,FI,GB,GR,IE,IS,IT,PT,SE,SI,SK,DE,LU,GE,FR
G20 at 20mbar, G30 Butane and G31 Propane at 30mbar
II
2E+3+
CH,CZ,DK,FI,GR,SE,SI,SK
BE, FR
G20/G25 at 20/25mbar, G30 Butane at 28-30mbar and
G31 Propane at 37mbar
II
2H3B/P
I2H: G20 Methane at 20mbar
I3B/P: G30 butane and G31 propane at 30mbar
CH,CZ,DK,FI,GR,SE,SI,SK
II
2H3+
CH, CZ,ES,GB,GR,IE, IT,PT,SI
I2H: G20 Methane at 20mbar
I3+: G30 butane at 30mbar and G31 propane at 37mbar
II
2E+3+
BE, FR,
I2E: G20 Methane at 20mbar
I3+: G30 butane at 30mbar and G31 propane at 37mbar