6
INSTALLATION
This appliance should only
be installed by a qualified
technician. Before installing
the appliance ensure that the
area that you have selected
is suitable and allows enough
ventilation for the appliance.
Important:
Always ensure the appliance is well ventilated and the air inlet and outlet are not blocked.
A (mm) 760
B (mm) 50 min.
C (mm) 20 min.
D
Air Inlet
E
Air Outlet (5mm)
770mm
520mm
D 51mm
H 55mm
750mm + 5
495mm + 5
50mm min.
50mm min.
50mm min.
50mm min.
5mm
1. Cut a hole in the worktop that corresponds with the above diagram. Ensure a 5cm space is
kept around the hole and the thickness of the worktop is at least 30mm.
Important: Ensure the worktop is heat-resistant to avoid deformation caused by the heat radiation
from the cooking zones (Fig. 4).
2. To secure the appliance to the worktop you will need to add the four fixing brackets.
3. Place the appliance on a smooth stable surface (use the packaging to protect the appliance)
upside down to locate the four fixing holes.
4. Screw each bracket into the located holes with the screws provided.
Important: Bracket positions may need to be adjusted slightly depending on the worktop thickness
(Fig. 5).
Fig 3.
Fig 4.
Summary of Contents for ECH77TC
Page 15: ...15...
