Tools required
Slide a
washer
and a
nut
over each
leg bolt
and hand tighten. Then use
the 7/16
” wrench to tighten the nuts
securely. Repeat this to attach the
other legs (
Figure 2
).
Step 2:
Install the
table leg
7/16” wrench
To lock the top, push down the small black
handle in the middle of the slide arm. To
unlock the top, simply push the handle up on
both sides.
Lock-up handle
located in the
middle of the
slide arm
(
Figure 3
). If you
prefer to use
Table Lock
to operate the table
top, please keep this
Slide Lock
unlocked at
all times after initial setup of the table.
Figure 3
.
Lockup handle location
Figure 2
.
Install the legs to the
2
Table top assembly
table top sub-assembly
Table leg
W
hen
in use
How to use the Slide Lock to lock and unlock the table top
Lockup handle
Washer
Nut
Leg bolt
Wrench