State Water Heaters SEH-200 Instruction Manual Download Page 20

20

Bottom of Menu

Elapsed time 

Total accumulated time the control system (water heater) has been 

energized.

total heating time

Total accumulated time the control system has been in the heating 

mode. IE: any heating elements have been energized.

Element # Cycles

Total  accumulated  count  of  heating  cycles  for  each  heating 

element.

Element # on time

Total accumulated heating on time for each heating element.

CCB Version

Software version for Central Control Board.

uIM Version

Software version for User Interface Module

CurrEnt fault / alErt MEnu

This menu displays non adjustable operational information. With the 

Fault History sub menu selected in Main Menu; press the Operational 

Button  underneath “SELECT” to display the current Fault or Alert 

message.  If  there  is  not  a  Fault  or Alert  condition  currently  active 

“(none)” is displayed to the right of this menu.

Main Menu - Current fault selected

fault hIstory MEnu

This  menu  displays  non  adjustable  operational  information.  The 

control  system  records  and  stores  the  last  9  Fault  and  Alert 

messages  in  chronological  order  in  this  menu.  The  most  recent 

will be at the top of the list. A time stamp is displayed below each 

listed  Fault  and Alert  message  showing  when  the  Fault  or Alert 

condition occurred.

The Fault History is useful when dealing with intermittent operational 

problems or when the customer has reset the control system prior to 

a service agent’s arrival.

With  a  Fault  or  Alert  item  selected  press  the  Operational  Button 

underneath  “VIEW”  to  display  the  details  for  the  Fault  or  Alert 

message. The Fault/Alert message screen displays a brief description 

of  the  condition,  contact  information  and  access  to  the Advanced 

service information sub menu.

fault history Menu

Current/history fault Message

fault oCCurrEnCE MEnu

Total  accumulated  number  each  individual  Fault  condition  has 

occurred  is  displayed  in  this  menu.  This  running  total  of  Fault 

Occurrences can be useful in determining which (if any) operational 

problems have been persistent.

fault occurrence Menu

Summary of Contents for SEH-200

























Reviews: