State Water Heaters SCE 65-400, Installation, User And Service Manual

Page: 48 / 72

Controls
48 Instruction Manual SCE
5
gis
5.3 Meaning of the icons
Table 5.1 displays the meaning of the icons on the control panel.
5.4 I/0/II switch
Using the I/0/II-switch, set the appliance to the ON- mode ('I' position), OFF
mode ('0' position) or the weekly program mode ('II' position). See paragraph
6.2 Operating states '.
In the OFF-mode the appliance actually continues to be live. This allows the
frost protection to remain active.
n
Remark
To disconnect the appliance from the mains, you need to use the main
switch between the appliance and the electricity grid.
5.5 Control thermostat
Using the rotary knob on the control thermostat, you can set the desired water
temperature to between ± 40°C and ± 70°C. The rotary knob is continuous and
has divisions of 1 to 4.
Table 5.2 provides an overview of positions and
temperatures.
Table 5.1 icons and their meaning
Icon Name Meaning
I/0/II switch 'ON mode' / 'OFF mode'
Reset button Resetting the burner controller
Temperature control Setting water temperature (T
set
)
Week timer Adjustment option for weekly program
Power Anode indicator
LED
Show Power Anode state
Fault LED
Locking out the burner controller
Voltage LED Confirmation of burner controller voltage
a
b
c
d
Table 5.2 Temperature settings
Position Temperature
1 ± 40°C
2 ± 50°C
3 ± 60°C
4 ± 70°C