Stat Medical Devices EASYMAX N User Manual Download Page 2

Page: 2 / 57

Dear EasyMax N SMBG System Owner,

Thank you for using the

EasyMax N

Self-Monitoring Blood Glucose (SMBG) System. We designed this

system to be dependable, easy-to-use, compact, and lightweight and portable to help you monitor your blood
glucose on a regular basis.

Please read this manual thoroughly before you begin testing. This manual provides you and your diabetes
care team with important information and step-by-step direction to use the

EasyMax N

Self-Monitoring Blood

Glucose System. To start testing quickly, you can also refer to the Quick Reference Guide.

Thanks again for choosing the

EasyMax N

SMBG System.

Intended Use

The

EasyMax N Self Monitoring Blood Glucose Test System

is intended for the quantitative measurement

of glucose in fresh capillary whole blood samples drawn from the fingertips or forearm. Testing is done outside
the body (

In Vitro

diagnostic use). It is indicated for use at home (over the counter [OTC]) by persons with

diabetes, or in clinical settings by healthcare professionals, as an aid to monitor the effectiveness of diabetes
control.

Summary of Contents for EASYMAX N


























































Search results

Summary of Contents for EASYMAX N

Reviews:

Related manuals for EASYMAX N

Brands by name

Popular brands

Stat Medical Devices EASYMAX N, User Manual

Search results

Summary of Contents for EASYMAX N

Reviews:

Related manuals for EASYMAX N

Brands by name

Popular brands