www.star-way.com
User
Manual
LASERLAB 200
14
Proper Usage Safety and Compliance
Information
DMX Control
7
Control features
Your projector’s DMX feature is capable of being controlled from a DMX-512 controller. The
projector utilizes the effects on your SmartMedia Card. To learn more about CypherLiteUSB,
please refer to the CypherLiteUSB Manual on the Software Disc.
Connecting your projector to a DMX-512 Controller
DMX-512 uses a three-pin cable similar to XLR or Microphone leads. We
recommend that you use DMX designated cables only as the use of XLR or
Microphone leads can affect the operation of your projector.
1.
Determine the length required to run between the projector and the
controller.
2.
Using DMX Cable, connect the male end to the controller and the
female to the projector.
3.
Address your projector accordingly so that it corresponds with
projector’s profile address on your controller.
4.
Apply power to both the controller and projector. You are now able
to control the projector via your controller.
This projector has been designed to be hung from a truss, ceiling or on a wall. It is
recommended that, for safety purposes, your projector be mounted using either a
suitable hanging clamp or bolted to the surface as instructed in this manual.
Neo-Neon offers a range of items, which are ideal for safe mounting. It is the
responsibility of the manufacture to provide useful instruction on the proper use of
this product. According to FDA Regulations you should operate this product in the
fashion illustrated below
.
