STARVILLE xBrick Full-Colour 16X3W, User Manual

Page: 28 / 44

Repeatedly press the [MENU] button until the display shows ‘Channel Mode’ . Press [ENTER] . Use
the [Up] and [Down] buttons to select one of the following DMX operating modes: 5 channels
( ‘5 Ch Mode’ ) or 13 channels ( ‘13 Ch Mode’ ). This setting is only relevant if the device is con‐
trolled via DMX.
When the display shows the desired value, press the
[ENTER] button to return to the main
menu or press and hold the [MENU] button for at least two seconds to change immediately to
the DMX operating mode.
Repeatedly press the [MENU] button until the display shows ‘Slave Mode’ . Press [ENTER] . Use
the [Up] and [Down] buttons to select ‘Master Mode’ , ‘Slave1 Mode’ and ‘Slave 2 Mode’ .
Then press [MENU] for at least two seconds to save the settings.
When in Master/Slave operating mode, the master device and those connected devices config‐
ured as Slave 1 work synchronously. Those devices configured as Slave 2 work mirror-inverted
to the master device.
When the display shows the desired value, press the
[ENTER] button to return to the main
menu.
DMX mode
Master/slave operating mode
Operating
LED floodlight
28