STARVILLE Octagon TheaterCW/WW 36x1W, User Manual

Page: 27 / 40

Press [M] . Press one of the arrow keys repeatedly until the display shows ‘DMX’ . Press [OK] .
Now you can set the number of the first DMX channel to be used by the device (DMX address).
Use the arrow keys to select a value between 1 and 512 (the display shows ‘A001’ … ‘A512’ ).
When the display shows the desired value, press [OK] to confirm the selection and then [M] to
return to the parent menu. Press [M] to return to the parent menu without any changes.
Make sure that this number matches the configuration of your DMX controller. The highest
possible start address in 5-channel DMX mode is 508.
Press [M] . Press one of the arrow keys repeatedly until the display shows ‘TEST’ . Press [OK] .
Press one of the arrow keys repeatedly until the display shows ‘COLD’ , ‘STRO’ or ‘WARM’ . Press
[OK] .
In this stand-alone mode, you can change the speed of the strobe effect in a range of 0 (no
speed) to 24 (high speed) and the dimmer settings for cold or warm white (ranging from 0 to
255).
DMX address
Manual test
Operating
Octagon Theater CW/WW 36x1W
27