STARVILLE MH-X20 Micro LED Spot, User Manual

Page: 31 / 60

Press [MODE/ESC] repeatedly until the display shows ‘dxxx’ . Now you can set the number of
the first DMX channel to be used by the device (DMX address). Use [UP] and [DOWN] to select a
value between 1 and 512.
When the display shows the desired value, press
[ENTER] to confirm the setting, and then
[MODE/ESC] to proceed to the next menu item. To switch the menu item without changes,
press [MODE/ESC] or wait a minute.
Make sure that this number matches the configuration of your DMX controller. The following
table shows the highest possible DMX address for the various DMX modes.
Mode Highest possible DMX address
6 channels 507
11 channels 502
DMX address
Operating
MH-X20 Micro LED Spot
31