Press
[FUNC]
until the display shows
. The device operates in stand-alone mode and dis‐
plays a pre-programmed show that can optionally be controlled by the built-in microphone.
Using the
[UP]
and
[DOWN]
buttons, you can now choose between the show types shown in
the table below. Press
[ENTER]
to store the value and to start the operation in Auto-Show
mode.
Display
Show
Automatic show in random order
Sound controlled automatic show in random order
Press
[FUNC]
until the display shows
and starts flashing. In this menu you can adjust the
sensitivity and thus the response characteristic of the microphone. Use the
[UP]
and
[DOWN]
buttons to select the settings S 0“ (sensitivity = 0, sound-controlled mode off) or S 1 (low sensi‐
tivity) to S 9 (high sensitivity). Press
[ENTER]
to store the setting.
Auto show mode
Responsiveness
Handling
DJ Lase 400-B Blue DMX
39
Summary of Contents for DJ Lase 400-B Blue DMX showlaser
