Instruction Manual
12
A:
Ensure that the display settings accurately reflect the desired
configuration. In this case, make sure that your display number ‘2’ is
on the right side of display number ‘1’. You can rearrange how Windows
treats each display in relation to each other in the Display Properties
Settings.
Q: There are lines running horizontally up and down the screen on
the monitor connected to USBVGADOCK.
A:
First, try to reset/refresh/resynchronize the display. Typically, there is
a button on the front panel of the display that allows this function.
Please consult the vendor documentation that accompanied the
monitor, if necessary to locate this button/function.
This could also be due to a low refresh rate setting. This can be
changed in the operating system
Display Properties
menu
.
In the
menu, click on Settings, Advanced, then Monitor. Make sure you select
the USB 2.0 VGA Device first and do not set the refresh rate higher
than what is supported by the connected monitor. This may damage
your monitor. You can also try to reset/refresh/resynchronize your
monitor.
Q:
Direct3D does not work?
A:
Please check our website for driver updates that may support this
function. If your application requires this, please use the main display
adapter.
Q:
USBVGADOCK does not work with a Windows Vista™ 64-bit
system?
A:
Please check our website for driver updates in the future, that may
support this function.
