Instruction Manual
3
Hardware Setup
Note:
a) Before you begin ensure the power switch on the USBDUP15 is set to the off
position.
b) The source or destination drives can be replaced with any SD/ SDHC/ Micro SD/
MMC/ Mini SD/ CF media card, using USB multimedia card reader (sold separately),
or Hard Drive(HDD) / Solid State Drive (SSD) through a Hard Drive docking station or
USB enclosure (sold separately).
1. Insert the
source USB flash drive
you would like to copy into the Source USB drive
port on the
USBDUP15
.
2. Insert up to 5
destination USB flash drives
(that you would like to be over written
with the same data that is currently on the source drive) into the
destination USB
drive ports
.
WARNING!
Any DATA on the destination USB Flash drives will be overwritten.
3. Connect the
power adapter port
on the
USBDUP15
to an available power source
using the included
Universal power adapter
.
4. Set the
power switch
on the
USBDUP15
to the on position.
5. The
USBDUP15
is now is ready for operation as the user menu appears on the
LCD display.