Instruction Manual
2
Installation
Hardware Installation
Note: Do not connect your USB device(s) to the USB Server until you have finished
installing the USB Server software and hardware!
Step 1 - Connect the USB Server to Your Network
First connect one end of an ethernet cable to the USB Server’s Ethernet port, and the
other to your network. This can be a free Ethernet port on your DSL router, Ethernet hub,
or WiFi router. If you do not have a network, you can connect the USB Server directly to
the ethernet port on your computer.
Step 2 - Connect the USB Server’s Power Supply
Connect the included power supply to the USB Server’s power connector.
Installing the Server Utility Software
The following instructions outline the installation of th eserver Utility software for all
versions of Windows operating systems. Although screen shots of the Server Utility
software may not match your operating syustem, please note that the button, menu,
and tab names are all identical on both platforms.
Step 1 - Insert the USB Server CD-ROM
Turn your computer ON and place the USB Server CD into the CD-Rom drive. Windows
will automatically open the CD Browser window. Choose your systems driver folder and
click Setup to start the installation process.
Follow the instructions on the screen.
