2
Installation
Driver Installation
Windows XP/Server 2003/Vista/Server 2008 R2/7
Once the computer has started and the operating system is fully loaded,
insert the provided Driver CD into the computer’s CD/DVD drive.
If AutoPlay opens, choose to browse the CD, otherwise go into “My
Computer” and access the CD/DVD drive that the CD is in.
Navigate to the “Windows” folder and then the folder for the version of
Windows you have and run the “setup.exe” file located in that folder. Follow
the onscreen instructions to complete the driver installation.
Mac OS 10.4/10.5/10.6
Insert the CD into the CD/DVD drive and wait for the CD to mount.
Open the mounted volume from the desktop or Finder and navigate to the
“Mac” folder and then the folder for the version of Mac OS you have and
run the PKG file located in that folder. Follow the onscreen instructions to
complete the driver installation.
Hardware Installation
1. After the drivers have been successfully installed, connect the adapter to
an available USB port on the computer system.
2. The adapter will be automatically recognized and the drivers installed.
3. Once the operating system has completed installing the drivers, a new
networking device should now be available for use.
4. Connect an RJ45 terminated Ethernet cable to the adapter and the green
“LINK” LED should light up to indicate a connection to the network is
detected.
5. Make any configurations changes necessary for your network, though the
normal methods offered by your operating system.
