4
Troubleshooting
If you experience any problems with this adapter, first
make sure the appropriate driver is loaded, the proper
cable is connected to the adapter and the hub complies
with the adapter specification; then check the LED.
This adapter provides two LEDs to indicate
network status.
(1) 10M/100M
This LED indicates the connection speed of the USB
Ethernet adapter. When the light is OFF, it indicates
that the 10Mbps UTP connection is established. When
the light is ON, it indicates that the 100Mbps Fast
Ethernet connection is established.
(2) Link/Activity
The Link/Activity LED indicates that the 10/100Mbps
UTP connection has been LINK OK or not. When the
light is OFF, it indicates that the 10/100Mbps port has
not been connected or LINK not OK. When the light is
ON, it indicates that the 10/100Mbps port connection
is OK. When the light is BLINKING, it indicates that
there is traffic flow on the network which the adapter
is connected to.
