4
How to Use
USB Server Software Setup
1. Make sure the USB device is connected to the device server and it is powered on (if
applicable).
2. Double-click the “Launch USB Server” shortcut icon on the desktop to start the
program.
3. If the USB IP device server is properly connected to the network, it should appear in
the list of device servers with an IP address. By default, the USB IP device server
uses DHCP to obtain an IP address, so the assigned IP address should be in the
same IP range as the host computer running the software.
If the network does not use DHCP, the device server will use an IP address of
192.168.1.50 by default. To change the network settings to match the network,
right-click on the device server and select “Setting Sever”. This will bring up the
configuration settings for the device server. Deselect the “DHCP” option and enter in
Summary of Contents for USB1000IP
Page 5: ...2 SideView 1 SideView 2...
