background image

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital 
device,  pursuant  to  part  15  of  the  FCC  Rules. These  limits  are  designed  to  provide 
reasonable  protection  against  harmful  interference  in  a  residential  installation.  This 
equipment generates, uses and can radiate radio frequency energy and, if not installed 
and used in accordance with the instructions, may cause harmful interference to radio 
communications.  However,  there  is  no  guarantee  that  interference  will  not  occur  in  a 
particular  installation.  If  this  equipment  does  cause  harmful  interference  to  radio  or 
television reception, which can be determined by turning the equipment off and on, the 
user  is  encouraged  to  try  to  correct  the  interference  by  one  or  more  of  the  following 
measures:

• 

Reorient or relocate the receiving antenna.

• 

Increase the separation between the equipment and receiver.

• 

Connect the equipment into an outlet on a circuit different from that to which the receiver  

  is connected.

• 

Consult the dealer or an experienced radio/TV technician for help.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This  manual  may  make  reference  to  trademarks,  registered  trademarks,  and  other 
protected  names  and/or  symbols  of  third-party  companies  not  related  in  any  way  to  
StarTech.com.    Where  they  occur  these  references  are  for  illustrative  purposes  only 
and do not represent an endorsement of a product or service by StarTech.com, or an 
endorsement of the product(s) to which this manual applies by the third-party company 
in  question.    Regardless  of  any  direct  acknowledgement  elsewhere  in  the  body  of 
this  document,  StarTech.com  hereby  acknowledges  that  all  trademarks,  registered 
trademarks, service marks, and other protected names and/or symbols contained in this 
manual and related documents are the property of their respective holders.

Summary of Contents for SV231DD2DUA
















Reviews: