Instruction Manual
11
NOTE:
It is unnecessary to switch the Sun mark ON or OFF if an authentic Sun
keyboard is being used on the console. In other words, you must ensure that the
Sun-marked port has not been selected if you are already using a Sun keyboard.
With different types of keyboard and computer, the Sun Mark must be set up in
compliance with the following instruction:
Keyboard Type
Computer Type
Sun Mark
USB (non-Sun)
PC/Mac
No
USB (non-Sun)
Sun
Yes
USB (Sun keyboard)
PC/Mac
No
USB (Sun keyboard)
Sun
Yes
ESC:
To exit the OSD, press the <
ESCAPE
> key
Hot-key Commands
Hot-key command is a short keyboard sequence used to select a computer, to activate
computer scan, etc. The KVM interprets keystrokes followed by one or two more
keystrokes. A built-in buzzer generates a high-pitch beep for a correct hotkey command,
otherwise, one low-pitch beep for an error and the bad key sequence will not be
forwarded to the selected computer.
The short form hotkey menu can be turned on as an OSD function (<
F4
>:More\Hotkey
Menu) every time the left <
CTRL
> is pressed twice.
NOTE:
Left <
CTRL
>: refers to the Control key on the left side of the keyboard.
1~8/A~H:
refers to the number keys ‘1’~’8’ in the upper row of the keyboard and
character keys ‘A’ ~ ‘H’. Do not use the keypad at the right of the keyboard.
To select a computer by hotkey command, you must know its port number, which is
determined by the KVM Switch connection. For a computer connected to a Slave, two
characters represent its port. The first character is the port number of the Master unit
(1~8) and the second one is the port number of the Slave (1~8 or A~H). Please note that
only the Master’s ‘PC1’ ~ ‘PC8’ ports can be connected to a Slave.
EXAMPLES:
Left <
CTRL
> , Left <
CTRL
>, <
7
> : Selects a computer connected to port 7 of the Master.
Left <
CTRL
> , Left <
CTRL
>, <
6
>, <
C
> : Selects a computer connected to port C of a
Slave connected to port 6 of the Master.
Auto Scan
In this mode, the KVM Switch automatically switches from one power-on computer
to the next, sequentially, in a fixed interval. During AutoScan mode, the OSD displays
the name of the selected computer.
Left <
CTRL
>, Left <
CTRL
>, <
F1
>
