background image

Instruction Manual

12

Receive Side Scaling

Enables Receive Side Scaling (RSS). RSS balances receive traffic across multiple CPUs or 

CPU cores. This setting has no effect if your system has only one processing unit.

NOTES:

•  RSS must be enabled for Intel® I/O Acceleration Technology to function under 

Microsoft Windows Server 2003.

•  RSS is not supported on some adapters configured to use Virtual Machine Queues 

(VMQ). For these adapters VMQ takes precedence over RSS. RSS is disabled.

•  Changing this setting can cause a momentary loss of connectivity.

Teaming Notes:

•  If RSS is not enabled for all adapters in a team, RSS is disabled for the team.
•  If an adapter that does not support RSS is added to a team, RSS is disabled for 

the team.

•  If a non-Intel adapter is added to a team, its RSS settings must match the Intel 

adapters in the team.

•  Not all adapters support all RSS queue settings

TCP/IP Offloading Options

IPv4 Checksum Offload

Enables the adapter to verify the IP checksum on received packets and compute 

checksum on transmitted packets. Enabling this feature can improve IP performance 

and reduce CPU utilization.

NOTE:

 Changing this setting may cause a momentary loss of connectivity.  

TCP Checksum Offload

Enables the adapter to verify the TCP checksum on received packets and compute 

checksum on transmitted packets. Enabling this feature can improve TCP performance 

and reduce CPU utilization.
This setting can be configured separately for IPv4 and IPv6.

NOTE:

 Changing this setting may cause a momentary loss of connectivity.  

Summary of Contents for ST2000SPEXI




























Reviews: