2
Introduction
Thank you for purchasing a StarTech.com controllable video splitter. Now you can share
the image from one computer over two (ST122SW) or four (ST124SW) monitors, and be
able to turn the signal to those monitors on or off. The built-in video amplifiers let you
place your monitors up to 210 ft (65m) away and still experience crystal-clear video
signals with resolution up to 2048 x 1536 pixels. These switches are also daisy-chainable
for future expansion and are compatible with a wide range of displays.
Features
• Allows one computer to provide simultaneous displays on two (ST122SW) or four
(ST124SW) different monitors
• Lets you turn each monitor on or off through buttons located on the splitter
• Works with VGA, SVGA, XGA, and Multisync monitors
• Provides a high video bandwidth (400 Mhz) for crystal clear 2048 x 1536 resolution
• Daisy chainable for almost unlimited expansion
• Uses a built-in video signal amplifier which allows a cable length of up to 210 ft
(65m)
• Uses standard monitor extension cables (StarTech.com coaxial VGA cables
recommended for best picture quality)
• Compatible with DDC, DDC2 & DDC2B (on Video Out port 1)
• Includes a 7.5V (800mA) power adapter
Before You Begin
To ensure a quick and easy device installation, please read through this section carefully
before attempting to install the device.
Requirements
• Computer with a HD-15 video port and a mini-stereo audio port
• VGA, SVGA, XGA, or Multisync displays with HD-15 connectors
• HD-15 monitor cables (like StarTech.com’s coaxial high-resolution video cables)
Contents
This package should contain:
• 1 x Video splitter
• 1 x Power adapter (7.5V, 800mA)
Summary of Contents for ST122SW
Page 8: ...Revised November 27 2003...
