background image

Instruction Manual

1

Introduction

The ST121WHD Wireless Video, Audio and IR Extender lets you connect a remote 
HD display or projector up to 30m (100ft) away from the HD source wirelessly. The 
ST121WHD is a bundled kit that includes both a local and a remote unit providing a 
complete end to end solution for a single source to display connection.  This wireless HD 
extender eliminates the need for expensive cable infrastructure, and provides a wireless 
solution where cabling is undesirable, i.e. in the middle of a room, or boardroom.

The Wireless HD extender kit is compliant with WHDI and HDCP standards, ensuring 
even the latest devices will be able to pass a signal with support for full 1080p 
resolutions and the accompanying digital audio.  Control your source  device remotely 
using the IR extender for a complete HD extension solution.

The kit includes the transmitter and receiver units for a cost-effective, ready-to-use 
digital signage solution. 

Backed by a StarTech.com 2-year warranty and free lifetime technical support.

Packaging Contents

• 1x 

Wireless 

HD 

Transmitter

•  1x Wireless HD Receiver

•  2x Positioning Stand

•  1x HD Cable

•  1x IR Remote Extension Connector

•  2x Universal Power Adapter (NA/UK/EU)

•  1x Instruction Manual

System Requirements

•  HD enabled video source device (i.e. computer, Blu-ray Player)

•  HD enabled display device (i.e. television, projector)

•  Available AC electrical outlet for transmitter and receiver

•  HD cable from receiver to display (HD cable from video source to transmitter is provided)

Summary of Contents for ST121WHD














Reviews: