Instruction Manual
2
Introduction
Packaging Contents
• 1 x Wall-mounted HDMI Extender
• 1 x Wall-mounted HDMI Receiver
• 1 x Universal Power Adapter (NA/UK/EU)
• 1 x Instruction Manual
System Requirements
• HDMI-enabled video source device (i.e. computer, Blu-ray player)
• HDMI-enabled display device (i.e. television, projector)
• Available AC electrical outlet or DC terminated power source for either the
transmitter or receiver
• 2x HDMI cable (for video source to transmitter and receiver to display)
Preparing Your Site
1. Determine where the local video source (i.e. computer, Blu-ray player) will
be located and set up the device. Ensure this is near an electrical box with 2x
terminated RJ45 connectors leading to the remote display.
2. Determine where the remote display will be located and place/mount the display
appropriately. Ensure this is near an electrical box with 2x terminated RJ45
connectors leading to the local video source.
Note:
This HDMI extender kit features Power Over Cable, allowing both the transmitter
and receiver to be powered from a single power source that connects to either the
transmitter or receiver unit. Please ensure that the unit you’ve chosen to power
is situated near an available AC electrical outlet, or a DC terminal power source is
available in the electrical box for the transmitter or receiver unit. Make sure all devices
are turned off before beginning installation. Before you begin Hardware Installation
ensure both transmitter and receiver are properly grounded.
