Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-
party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only
and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which
this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered
trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the
property of their respective holders.
Warranty Information
This product is backed by a five-year warranty.
For further information on product warranty terms and conditions, please refer to
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents)
for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of
business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations
or exclusions contained in this statement may not apply to you.
FR: startech.com/fr
DE: startech.com/de
ES: startech.com/es
NL: startech.com/nl
IT: startech.com/it
JP: startech.com/jp
StarTech.com Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Rd,
Brackmills
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
2500 Creekside
Parkwy
Lockbourne, Ohio
43137
U.S.A.
Product Dimensions
5. Insert four of the
M4 x 20 mm Screws
through the
VESA Monitor Mount,
Adapter
,
and
Spacers
and into the
Mounting Holes
on the back of the
Monitor
.
6. Using a
Phillips Head Screwdriver
, tighten the
M4 x 20 mm Screws
, being careful
not to over-tighten the
M4 x 20 Screws
.
Mounting the Adapter While Using a Monitor Stand
If you are using a monitor stand with a VESA Mounting Pattern on the back of the
Monitor
, the
Adapter
can still be mounted to the back of the
Monitor
.
1. Place the
Monitor
screen facing down on a flat, clean, and secure surface.
2. Align the
Mounting Holes
on the
Adapter
with the
VESA Mounting Holes
on the
back of the
Monitor
.
3. Insert four of the
M4 x 12 mm Screws
through the
VESA Mounting Hole
on the
Adapter
and into the
Mounting Holes
on the back of the
Monitor
.
4. Using a
Phillips Head Screwdriver
, tighten the
M4 x 12 mm Screws
, being careful
not to over-tighten the
M4 x 12 Screws
.
