12
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
4.
Thread the
Small Washers
(x 3) over the
5 x 20 mm Self
Tapping Screws
(x 3) to complete the
Screw Assemblies
.
5.
Align the
Angled Bracket
with
Pilot Holes
, located
in the
Wall
.
6.
Insert the
Screw Assemblies
(x 3) through the
Angled
Bracket
and into the
Wall
and tighten, using a
Phillips
Head Screwdriver
. (Figure 10)
Attach the Tablet Enclosure Assembly to the Angled
Bracket
1.
Align the holes, located on the
Rear Plate
of the
Tablet
Enclosure Assembly
, with the holes, located in the
Angled
Bracket
.
2.
Insert the
M4 x 8 mm Screws
(x 4) through the
Angled
Bracket
and into the rear of the
Tablet Enclosure Assembly
and tighten, using the
M2.5 Hex Key
.
3.
Attach the
Power/Data Cable
to an available
Power Source
.
