16
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Copy Area
The
Copy Area
function enables you to adjust the mode in
which the hard drives are copied.
1.
Use the
Up/Down Naviagation
buttons to select
Copy
Area
.
2.
From the
Copy Area
menu, select one of the hard drive
duplication methods:
•
System and Files:
It will copy source HDD’s System and
Files instead of the whole HDD. The system will analyze the
source HDD and identify the data area to copy. The copy
will be completed as long as the source HDD data is within
the size of the target HDD.
Note:
System and Files only supports FAT, NTFS, and
LINUX(ext2/ext3/ext4).
•
All Partitions:
This mode will copy all of the partitions bit
for bit including the free space. It can support all of the
formats
•
Whole HDD:
This mode will copy the entire HDD,
regardless of the content, format, partition, or free space,
and it will take much more time to duplicate the source
HDD completely.
•
Percentage:
Copies a percentage of the connected
Source HDD
. Enter a starting percentage e.g. 0% and an
endding percentage e.g. 25%.
Skip Error
The
Skip Error
function allows you to define a number of
acceptable sector errors during the duplication process in the
event that the hard drive has bad sectors on it.
