![StarTech.com SAT2IDEADP User Manual Download Page 7](http://html1.mh-extra.com/html/startech-com/sat2ideadp/sat2ideadp_user-manual_1364548007.webp)
Instruction Manual
4
3. Connect the ribbon cable and power cable to the connectors on the IDE hard drive.
4. Place the IDE drive onto the back plate of the SAT2IDEADP adapter and fold/tuck the
cables into the opening of the adapter. Slide the IDE drive towards the connectors
until the mounting holes on the bottom of the drive line up with the mounting
points on the back plate of the adapter. The edge of the IDE drive should be sitting
almost flush with the edge of the adapter’s opening.
5. Use the provided screws to fasten the drive to the back plate of the adapter. Small
screws provided for 2.5” drives and larger screws for 3.5” drives.
Mounting Screws
Tuck in Cables
Summary of Contents for SAT2IDEADP
Page 5: ...Instruction Manual 2 ...