Instruction Manual
5
6. Using the included
4-pin to SATA Power Adapter
, connect the
4-pin power
connector
on the
S322SAT3R
to an available
SATA Power Source
in your
Computer System
.
7. The
S322SAT3R
is now been installed, close your computer case and start your
computer to build the RAID array.
8.
(Optional)
If you would prefer to lock your RAID array so it cannot be altered by the
RAID mode setting jumper pins, power down and open your
computer system
, and
set the
RAID
Lock/Unlock Jumper Pins
to the lock position. (See Configure RAID).
The computer system can then be closed and powered back on.
