Instruction Manual
5
6. Slide the drive trays back into drive slots on the HDD Enclosure.
7. Replace the drive panel and thumb screws.
8. Connect the included thunderbolt cable from one of the Thunderbolt ports on the
back of the enclosure, to an available Thunderbolt port on your computer.
Note:
Either Thunderbolt port may be used to connect the enclosure to the host
computer system. The remaining Thunderbolt port may be used to daisy chain to
an additional device such as another enclosure, or Display.
9. Connect your power adapter from the power jack on the unit into an available
power outlet.
