Instruction Manual
2
Introduction
Packaging Contents
• 1 x USB 3.0 Dual 2.5” SATA HDD/SSD RAID Enclosure
• 1 x USB 3.0 cable
• 1 x USB to Power Cable (Type H Barrel)
• 1 x Universal Power Adapter (NA/EU/UK/AUS)
• 1 x Installation screw kit
• 1 x Quick install guide
System Requirements
• Computer system with available USB port
• 2x 2.5in SATA Hard drive (HDD) or Solid State Drive (SSD)
Hardware Installation
WARNING!
Hard drives and storage enclosures require careful handling, especially
when being transported. If you are not careful with your hard disk, lost data may
result. Always handle your hard drive and storage device with caution. Be sure that
you are properly grounded by wearing an anti-static strap when handling computer
components or discharge yourself of any static electricity build-up by touching a large
grounded metal surface (such as the computer case) for several seconds.
1. The back panel of the enclosure is held securely in place with four screws. Use a
Philip’s head screw driver to remove the screws.
